粒状活性炭の製造方法は何ですか?
Jul 08, 2024
ご伝言
粒状活性炭の製造方法は、次の 2 つのカテゴリーに分類できます。1) バインダーを添加せずに直接活性化する方法。 2)結合剤を添加して炭素質前駆体を成形し、次に炭素活性化プロセスを実行する。
バインダーフリー方式
バインダーを添加せずに粒状活性炭を製造する方法は、一定の形状およびサイズの天然木材原料を直接活性化して非晶質の粒状活性炭を得る方法と、2つのタイプに分けられます。もう一つは、バインダーを添加せずに薬剤賦活法により自己成型して粒状活性炭を作製する方法である。
Abundant shaped natural wood plant raw materials, such as coconut shells, walnut shells, olive kernels and other fruit shells and kernels, can be directly used to prepare amorphous granular activated carbon by physical or chemical activation methods. Poinern et al. used macadamia shells as raw materials, firstly carried out high-temperature carbonization, and then combined with carbon dioxide activation method to prepare granular activated carbon, and explored the effect of activation temperature on the adsorption of gold by activated carbon. The results show that high-temperature activation is conducive to improving the gold absorption capacity of granular activated carbon. He Deliu and others invented the phosphoric acid method to produce wood amorphous granular activated carbon technology. Through pre-crushing, soaking, floating and low-temperature drying and carbonization of raw materials (mainly fruit shells and cores), products with high strength and adsorption capacity can be obtained after activation. The results show that the raw material particle size of 20 ~ 40 mesh is conducive to the penetration of the activator. Compared with the zinc chloride method, the strength of the amorphous carbon is improved, and the iodine value is >950 mg/g, B caramel color >物理的方法に比べて100%、製造コストは40%削減されます。
化学的活性化法は、炭素質原料に一定量の化学物質を添加し、十分に混練、可塑化してタールなどの接着剤や可塑剤を生成する方法であり、追加のバインダーを添加することなく成形できます。調製方法は、炭素活性化を加熱することにより一段階で完了します。粒状活性炭の製造に使用される化学薬品は、主に ZnCl2、H3PO4、KOH、NaOH、H2SO4、CaCl2、K2CO3 などです。化学活性剤が異なれば、原料の活性化メカニズムも異なります。
バインダー法
バインダーの添加は主に、賦形活性炭を製造する際に原料自体の粘着性が無い、賦形が難しい、製品強度や表面平滑性が不十分であるといった問題を解決するために行われます。結合剤の種類と量は活性炭の強度と吸着性能に大きく影響します。多くの場合、バインダーを添加すると粒状活性炭の細孔の一部が塞がれ、その結果、吸着性能が低下する一方で機械的強度が向上します。一般的な結合剤としては、コールタール、デンプン、木タール、亜硫酸パルプ廃液、粘土、廃糖蜜、カルボキシメチルセルロース、樹脂などが挙げられます。
石炭は、炭素含有量が高く、資源が豊富で、価格が安いという利点があり、粒状活性炭の原料として広く使用されています。現在、石炭系粒状活性炭の製造に使用される原料炭は、無煙炭、弱粘着性炭、褐炭などの非粘着性石炭および弱粘着性石炭であるため、原料に一定量のバインダーを添加する必要があります。石炭を押して形を整えます。コールタールはアスファルト含有量が高く、石炭粉末との結合力が強いため、我が国の石炭ベースの活性炭工場のほとんどはバインダーとしてコールタールを使用しています。 Du Yaping et al.石油系粒状活性炭のバインダーとしてコールタールを使用し、無煙炭と混合し、押し出し、賦活することで機械的強度が高く、微細孔が発達した粒状活性炭が得られ、空気や水を浄化するための吸着剤として使用できます。 。
石炭原料に加えて、研究者は木材原料やその他の原料から粒状活性炭を製造することについても多くの研究を行ってきました。シア・ホンインら。タバコ廃棄物を原料として、木タールを複合結合剤として使用し、それぞれ水蒸気賦活法と二酸化炭素賦活法により粒状活性炭を調製した。結果は、900度で活性化すると、蒸気法で調製された粒状活性炭は微多孔性であり、BET比表面積が1037 m2 / g、総細孔容積が0.8152 mL/g;二酸化炭素法で製造した活性炭も微多孔質であり、比表面積は947.81m2/g、全細孔容積は0.48mL/gであったが、収率は水蒸気法よりも高かった。
お問い合わせを送る




